OEM Monitor and Tailgate Backup Camera Install on a 2007 Toyota Tundra
Introduction
Upgrading your vehicle with an OEM monitor and tailgate backup camera can significantly enhance your driving experience. This guide will provide step-by-step instructions on how to install these components on a 2007 Toyota Tundra SR5 Crew Cab.
OEM Plug and Play Camera Kit
For this installation, we will use an OEM plug-and-play camera kit specifically designed for the 2007-2009 Tundra. This kit includes a camera, wiring harness, and all necessary hardware.
Installation Procedure
Monitor Installation
- Remove the factory radio bezel using a trim removal tool.
- Connect the OEM monitor to the wiring harness and secure it in place behind the bezel.
- Reinstall the bezel and connect the monitor to the power source.
Camera Installation
- Drill a 1-inch hole in the center of the tailgate.
- Insert the camera into the hole and secure it with the provided mounting bracket.
- Connect the camera to the wiring harness.
Wiring
- Route the camera wiring through the tailgate and into the cabin.
- Connect the camera wiring to the monitor.
- Connect the power wire to a 12V power source, such as the reverse light circuit.
Calibration
- Start the engine and put the vehicle in reverse.
- Adjust the camera angle using the provided wrench.
- Ensure that the camera has a clear view behind the vehicle.
Conclusion
By following these steps, you can successfully install an OEM monitor and tailgate backup camera on your 2007 Toyota Tundra SR5 Crew Cab. This upgrade will provide you with increased visibility and convenience when reversing, making your driving experience safer and more enjoyable.
Amazon Com
Camera Source
Komentar